MASSOTH DIMAX MULTI FUNCTION MODULE (BRAKING MODULE) 8155001 LGB 55063

MASSOTH DIMAX MULTI FUNCTION MODULE (BRAKING MODULE) 8155001 LGB 55063.

Massoth 8155001 braking module (multi function module). This is boxed and has not been used Instruction are included and are the ones for the identical LGB 55063 modeule as this was also made by Massoth for LGB The analog mode functions are: timer controlled stop reversing loop shuttle operation The digital mode functions are: stopping at programmed stop command stopping at programmed stop command optional stopping or no stopping when passing in the opposite direction Stopping triggered by a stop signal stopping triggered by a signa and no stop in the opposite directionl reduced speed section digital reversing loop powerless holding track block signal operation with stopping or reduced speed section with stopping All functions may be used two fold or in combination. The DiMAX Multi Function Module can be used with all NMRA compatible systems. The stopping feature is only available with an additional booster supporting the stopping function, e.g. LGB® 55090 or DiMAX 1203B. The function triggering in a stopping section is patented by Massoth Electronics and only available with Massoth Electronics or LGB® boosters.

Replicate real train action on your LGB MTS layout with this versatile device. Here are examples: A locomotive approaches a “Stop” signal. After the loco passes a track contact, it will slow with at a preset rate and stop in front of the signal. However, if the signal says “Go,” the loco will continue without stopping. Prototypical sections with reduced speed can be modeled as well. The loco will slow to a preset speed, traverse the section at that speed, then accelerate. You also can have a train stop at a station and leave after a preset time. These and other functions are possible with the MTS Braking Module. An MTS Power Extender (55090) with modified software is required to use these braking modules. 55090s produced in 2004 have the modified software. The modification procedure for earlier 55090s is detailed on a coupon included with the module. Please note that a 55090 can be used with braking modules or to power an additional track section but not both at the same time.